Streak, Zapier and Automating Tasks for Our Vacation Rental

After casting about for better ways of managing a vacation rental in Yosemite, we finally stumbled on Streak and Zapier in the last year. This combination has kept us more organized, freed us from onerous data entry tasks and let us get back to the parts of our business and life that we enjoy.

How do you like to spend your time?

Do you prefer spending your time giving great customer service or spending it keeping your books? Would you rather be relaxing or keying in data?

If you would rather spend time on customer service and relaxing, this guide is for you.

A word of warning: this guide is long and it is still not a click-by-click tutorial. Streak and Zapier are both fairly intuitive, so I’m just trying to point people in the right direction. If you need more help, just ask your question in the comments and I will add detail or create a tutorial post and screencast.

Also, this guide just scratches the surface. I hope to automate more tasks, but the paradox is you have to find the time to set up automation!

Problem #1: I Hate Data Entry

shocked woman at computer asking to save her from Quickbooks

I love most aspects of running a vacation rental. I like to meet our guests and help them plan their stay. I like the maintenance, especially the gardening. And I have even settled a few domestic disputes and saved a vacation if not a marriage! It’s been fun.

The part I don’t like? The record keeping and data entry. Getting the data from email and listing site dashboards into our main calendar and accounting system was always a pain point.

We tried Quickbooks and absolutely hated it.

One of the best decisions I’ve made in the last ten years was to quit listening to the people who told me how great Quickbooks is. I switched instead to a set of spreadsheets, a customer relations management (CRM) tool and a calendar, all tied together with Zapier (more on Zapier later). Since Zapier integrates with Quickbooks Online, if you disagree with me and actually find Quickbooks usable, the basic method I outline here should work for you as well.

Problem #2: Coordination

In addition to data entry, my wife and I needed a way to communicate what was done and not done. In particular, we needed a better way to know which inquiries and reservations needed attention.

This is especially a problem because inquiries are coming from multiple sources for multiple people and we just didn’t have a good way to show clearly who had handled what.

Solution: Streak + Zapier + Sheets

The short version: Streak organizes our guest information and Zapier whooshes all the data to the places we need it to go to manage our schedule and pay our taxes.

Organizing with Streak

We started by looking for a solution to the coordination problem. After a few false starts, we found Streak. Streak is a Customer Relations Management (CRM) tool that integrates with Gmail. That was perfect for us because we were already using Gmail extensively (a Googe Apps account actually). It lets you know at a glance what the status is for any given customer and also lets you see quickly what needs to be done today.

Streak Dashboard showing stages and boxes in the Reservations pipeline
Reservations pipeline showing stages and boxes

Streak has three basic elements (see screenshot):

  • Pipelines represent a journey of some sort. In our case, a pipeline called Reservations tracks the guest journey from initial inquiry to post-stay thank you.
  • Stages are just like they sound. They are stages along that journey that is defined by the pipeline. So in the Reservations pipeline, we have stages like Inquiry, Approve Reservation, Schedule Code, et cetera.
  • Boxes contain the thing that is moving along the pipeline. In our case, boxes hold details for a given guest. If you were using Streak as a bug tracker, each box would contain a bug. If you were using it to manage job applications, each box would hold the details for an applicant.

How does this help manage reservations?

When a reservation comes in, it most often arrives as an email from one of the listing services— VRBO, Trip Advisor, AirBnB, etc.

I wish I could say that I’ve written a script that runs complex regular expressions and parses the email and automatically fills in everything I need. However, every listing service uses a different format. And each one has several different types of email (inquiry, booking request, etc). No single email or set of emails contains all the information we need. Automation would be messy. I am sure it can be done though.

Streak suggesting box names
Streak suggests box names

All by itself Streak does attempt to suggest a name for a new box and tries to match an email with existing boxes based on the sender and the subject. Again, these emails have too much variation for Streak to get it right, so normally we do this manually.

Back in the real world

So, yeah, back in the real world, we don’t have our reservations AI bot running yet. When a new inquiry comes in, our actual process looks like this:

  • Create a box with the guest name and add the inquiry to it.
  • Add that box to the Reservations pipeline.
  • Assign the box to the appropriate stage (Inquiry if we the person hasn’t decided, Enter Data if it’s a Book It Now reservation that we approved on the fly).

We take whatever information is in that initial email and enter it right then and there. In most cases, we also have to check our dashboard to get the customer contact info (it’s how the services monitor whether owners are dormant or active). It just takes a minute or two. And the best part: we will never manually enter that data again. Zapier will do the rest (more on that in a second).

Grouping and Sorting

Now that the data is entered, Streak lets me group and sort by any field. So I can group by stage and sort by arrival date. That lets me see everyone who is in the Schedule Code stage and which ones are arriving soon. I can also group arrivals by month and sort so I can see everyone arriving in August and see which stage they’re in.

Streak sorting options
Group/Sorting Options
Streak sorted by arrival date
Grouped and sorted

Now either my wife or I can log into Gmail and see at a glance who’s arriving soon, who needs codes, and so forth.

Guest Info All in One Place

When we look in our inbox, every email is labeled with the pipeline and stage it belongs to. And best of all, every time we open an individual email or a box, all the data for that customer is there.

Inbox items are labelled with pipeline and stage
Every email labeled with pipeline
Streak reservation data when viewing individual email
All data field show for the box view but also, as here, when viewing any email in a box

Decide What Information Matters to You

Everyone runs their rental differently. The data you keep is entirely up to you. It is dead easy to add and delete fields in Streak. So we have Notes, Arrival Date and so forth, but with a couple of clicks you can add and field you want and they are all searchable, groupable and sortable. Streak is amazing.

So problem #2, the coordination problem, is solved already just by having Streak.

But we still have to get all of this data onto our calendar and into our spreadsheets. This is where Zapier comes to the rescue.

Zapier Magic

angry businessman telling colleague to quit copying and pastingWhat is Zapier?

Zapier is a service that lets apps like Streak and Google Sheets talk to each other.

Imagine Streak and Google Sheets both have cans (your data) in their hands. They can’t communicate with cans. Put a little hole in the bottom of each can, attach a string through the hole, pull it tight and magic! Streak can whisper into one can and the string lets Google Sheets hear it in the other one.

Zapier is the string that lets Streak talk to Google Sheets (and hundreds of other apps) communicate. And it is also magic.

So I set up two zaps to move my Streak information to Google Sheets and Google Calendar.

What’s a zap, you ask?

A zap is a recipe for getting a task done such as “Copy guest information in Streak to Google Sheets when the guest reaches the Streak stage Verify Data.” Zaps have triggers and actions.

Streak + Filter + Sheets
Zap: Streak + Filter + Sheets

The trigger I use is “Box changes stage” in Streak. So when I move a box from Inquiry to Approve Reservation, that fires the trigger and tells Zapier to take an action.

When the Streak stage changes, fire the trigger
Trigger: Take action when a box moves to a new stage

At this point, the action I want Zapier to take is to copy my data from Streak to Google Sheets. But there’s a problem here. At this point, I still haven’t entered the data. I don’t want to upload data at every stage change, only when I change to the stage Verify Data. So I need to add a Zapier filter (Thanks to Andrew Stewart from Streak for this tip).

Apply a filter so trigger only proceeds if condition is met
Only let Zapier continue if we’ve moved the box the Verify Data stage

Basically, you tell Zapier “When the ‘stage changed’ trigger fires, check to the make sure the new stage is ‘Verify Data.'” You can make these filters much more complex with AND and OR operators. This is super powerful.

Let’s assume we’ve hit the Verify Data stage (or whatever stage you choose). Now it’s time to put the Streak data into Google Sheets. But how does Zapier know which Streak fields to put in which columns? You need to map your fields to your columns.

How does Zapier know which Streak fields to put in which columns? You need to map your fields to your columns.

Map the Streak fields to the Sheets columns
Map Streak fields to Sheets columns.

Google Sheets Magic

Now comes the one part that’s a little complicated. When you work with spreadsheets, you probably just drag formulas. In other words, you pick a cell with the right formula and just drag down and that formula gets inserted into the next row and the next.

You can’t do that here.

If you’re like us, though, your spreadsheet has a lot of calculated values — bed tax and length of stay for example. So what do you do? Simple, in Google Sheets, I created an “automation row” that is locked to prevent edits and which uses ARRAYFORMULA() to apply the formula to all rows as data comes in, like this:

Google Sheets using ARRAYFORMULA

This looks complicated but never fear. The TOT Rent column is what we actually charge and what is in Streak. That comes straight in due to the mapping we did in the last step.

The others are calculated values for the Transient Occupancy Tax (TOT) and Tourism Business Improvement District (TBID) assessment, which are 10% and 1% respectively, and 11% in total TOT. To calculate these values for every row below the automation row, we just use this formula, where column R is the TOT Rent column:

=ARRAYFORMULA(IF(ISBLANK($R2:$R),,$R2:$R*0.1))

That may look complicated if you’re not a spreadsheet person, so let’s take this one bit at a time.

$R2:$R

This says “Start with cell R2 and go down as long as there are cells in the R column.” This is the range that will be fed to the ARRAYFORMULA in the end. A function that normally would have just one cell (like “R2”) works with a range (R2:R20) in an ARRAYFORMULA. By leaving off the number on the end of the range, we’re basically saying “We don’t know how many rows we’ll have, so if you find something, do your stuff.”

We have the $ sign there so that when we drag to other columns, the R is constant because it always refers to the TOT Rent column.

ISBLANK($R2:$R)

We test for this because we only want to make the calculation if we have a value for TOT Rent. This is not just a matter of keeping the sheet clean. If you don’t do this, it can autogenerate thousands of rows. You don’t want that.

=(IF(ISBLANK($R2:$R),,$R2:$R*0.1))

Now we’re getting into the meat of it. An IF statement has three terms: condition, value if true, value if false. In our case:

  • condition: if the R cell is blank
  • if true: do nothing (that’s why we have two commas in a row — there’s no action to take if R is blank)
  • if false: this means we DO have a value for R (rent charged) and we want to calculate the tax. TOT is 10%, so that’s R*0.1.

Finally, we wrap all of that in the ARRAYFORMULA() and that gives us our original formula which operates across the whole range.

Done!

Dates Are a Little More Complicated

You’re probably going to want to work with dates if you’re managing a vacation rental. We don’t enter the length of stay, for example. We enter arrival and departure and let Sheets calculate the number of nights.

This really isn’t any harder than the taxes, but you do need to know one more function: DATEDIF(). This used to be a huge pain because of the way Streak formatted dates. Now they’ve fixed it and you can just plug them straight into a cell just like we did for TOT Rent. Then you just take the difference between Arrival (column G) and Departure (column H) and you have length of stay:

=ARRAYFORMULA(IF(ISBLANK(G2:G),,DATEDIF(G2:G,H2:H,"D")))

Simple as that!

Wasn’t That Easy!

Just kidding! I know. This is a super long post. It probably makes this seem harder than it is.

In fact, the only part that is hard is getting your formulas right in Google Sheets. Streak, Zapier, Google Calendar, Gmail are all straightforward. Streak and Zapier have lots of contextual help to guide you. It will probably take longer to read this damn article than to get everything set up! If you run into trouble, ask questions in the comments and I’ll do my best to help.

What’s the Payoff?

Before Streak + Zapier + Sheets, we always had this mad rush at the end of the month and at tax time. We had a complicated process of reconciling the inputs from various rental services, getting those into accounting software and then running the calculations we needed for taxes.

Now, we just enter the data as it comes in. Everything we need for a customer is in one place — all emails, notes, transactions and trip details are in their box. When they reply to us, that reply is automatically part of the box too and so when we look at the reply, we have all our notes.

Then, at the end of the month, we just go to our spreadsheet which is fully maintained by Zapier. We don’t touch it until tax time. Then we go in and sort by arrival date because Zapier enters reservations in the order we take them.  We pull the monthly total in two minutes and our taxes are done.

Would it be an exaggeration to say this is life changing? Perhaps, but I love this system. Quickbooks would have some advantages, but I absolutely hate that program. I use a lot of software and could never get my head around that one. Even as great as it may be, Streak still has some advantages — it keeps all customer notes and communication in one place, rather than email in one place and contact, accounting and other information in another.

Our pain point used to be getting the data from Streak into the spreadsheet for tax purposes. Now that we’ve automated it with Zapier, that friction is gone.

Overall, it has reduced our stress, given us more free time and helped us devote more time to things that actually matter to customers, like improving our rental (we just added an outdoor sitting area and air conditioning) and helping them plan their trips.

It’s not for everyone and if you have a system that you love, don’t change. But if you’re a small rental operation and you’re struggling with complex accounting software or you’re using expensive booking systems, you might consider this. Because there is one thing I forgot to mention: every single thing I’ve shown works with the free versions of Streak, Zapier and Google. To me, that’s fairly minor. The paid versions are not that expensive. But free is a nice bonus!

8 thoughts on “Streak, Zapier and Automating Tasks for Our Vacation Rental”

  1. Hi Tom,

    Thank you for the very in depth look into how you manage your vacation rental using Streak and Zapier – I found it very interesting.

    I’m no stranger to either platform and have quite a bit of experience with both.

    Interestingly, I am now a year into adding vacation rental management to my list of most time consuming activities from day to day and I still haven’t found the right solution.

    So far, my experience has led me to some general rules of thumb, at least as it pertains to the platforms I’ve tried. One is that there doesn’t seem to be a single solution that ties everything needed to manage and market my vacation rentals up in a nice pretty bow. But I more or less knew that when I started my journey.

    I also own a travel agency and we experience this second point just as much as in the vacation rental industry and that is the fact that access to data and APIs seem to be very limited.

    In many other industries, it’s pretty easy to setup the business so that it uses completely different cloud based software for every functional area – accounting, lead management, Crm, mailing list management, marketing automation, customer support, payroll, team collaboration, task management, email or communication management including virtual PBX, auto attendant, payment services, invoicing, loyalty, review management, reputation management, employee perks, human resources and the list goes on and on.

    My point is that it’s entirely possible to use specialized software for its given purpose, which in essence allows you to cherry pick the software that best suits your needs for the given function – and have each and every application talk to each other – via direct integration and with services like Zapier and Cloud pipes.

    This is an awesome idea – smart, efficient, productive and the result is complete business automation except for the critical components such as building relationships, talking to guests and to customers.

    I just don’t understand why the travel industry (from an agent’s perspective) and the vr industry seem to be so far behind other industries in this idea.

    There are countless start ups in both spaces spending time, resources and tons of money developing these all in one solutions that trap it’s users within its own ecosystem which seriously limits all of us.

    If some of these vacation rental specific platforms would simply build a Zapier integration – I’d be happy as could be!

    If we had Zapier integration available from a channel manager (Rentals United), inquiry manager, property management (Guesty comes to mind), turnover management (Properly App), HonorTab, etc etc.

    Those named are my specific preferences but the point is that we could all choose to work with the software we like the best for each thing we need software for and build our own all in one solution!

    I’m ranting but I hope my point came across. I’m also on my Android device so apologies for Grammer, spelling, etc.

    Reply
    • Wow! That’s a lot of writing for thumb typing! I totally agree though. It would be super helpful to get VRBO, AirBNB, Trip Advisor etc on Zapier and IFTTT. I have written to them and suggested it, but as you say the problem is that it’s not a very tech audience. But if I were to say I had an ulterior motive in writing this post it would to show the companies the value of these devices as much as helping people figure out their own automations. It would be great to cut out the middleman.

      Reply
  2. … how do you get email content into the google sheets… To fill in the data to the extract to streak? Sorry if that was made obviously..: I’m new to this …
    Also did you build the box change stage tab I’m streak? I’ve gotten to this part but zapier cannot find the command “box change stage”

    Reply
    • Hi Kailey, I enter the data manually. I’ve thought of automating it, but the problem is that the data comes from so many different sources with different formats, that it’s hard to automate.

      As for the box change trigger, there’s a trick there – you choose the trigger “Box Change Stage” which is built into Zapier. Then you add an “only continue if” filter and set “stage” “contains” and then the name of your stage. That’s it!

      Reply
  3. Hi Tom, that’s a great post. I’m fed up with the SaaS companies in the Vacation Rental sector as they tie youn in too heavily. Do you use your process to integrate guest payment and email triggers? If so can you suggest providers?

    Reply
    • My apologies Llion. I saw this when it came in, then it fell off my radar. I do not have any such process, but I think you could do it just fine with Zapier or IFTTT. It’s on the eternal “project” list, but haven’t gotten there yet.

      Reply
  4. Have you created Zaps (or found another system) for follow up emails? I’m wanting to figure out how to automate 4 emails–check in reminders about 1 week before arrival, welcome-the next morning, check out reminders-one day before departure, please review-next day after departure. Is this possible? I’ve used Streak for years and it’s just about the best thing since sliced bread, especially for free!!

    Reply
    • Hi Denise – I think you sent this via email too, since I know I wrote a response. The answer is yes – if you can get the data into a Google Sheet with a date column, you can have Zapier check your spreadsheet on a schedule (I do daily) and have it send the arrival info reminder on the date the guest chooses. You could probably do some simple date math based on the checkin and checkout dates, though I think it’s easier to do that in your spreadsheet and then key off those columns with Zapier.

      Reply

Leave a Reply to Tom Lambert Cancel reply